Heaps and dams
Stockpile and tailings dust: wet it, or bind it?
A mine’s roads are not its only source of dust. Stockpiles, tailings storage facilities, ash dumps and dams, and bare ground all lose fine material to the wind. There are two broad ways to hold it down: keep the material wet, or bind its surface into a crust. Which one fits depends on whether the surface is being worked.
Worked or standing?
The first question is whether the surface is disturbed every day. A heap that is stacked and reclaimed, or a face that machines work, keeps turning up fresh material: a crust on it would soon be broken, so the dust has to be managed with water as the work goes on. A surface that is left standing, such as the slope or top of a tailings storage facility, an ash dump, an idle stockpile or bare ground, can be bound in place.
| The surface | The approach | 88Chemco product |
|---|---|---|
| Coal heaps and other dense material heaps, wetted by cannons or sprays | Wet it: get the water into the heap and keep it there | SuperWetter |
| Stockpiles, tailings storage facilities, ash dumps and dams, exposed soil: ground that is not driven on | Bind it: a crust over the loose surface, on slopes and flat tops | DustSkin |
| Ground that trucks drive on | A road: water, a water extender or a road binder | Haul road dust control |
Wetting a dense heap
Water on a dense heap does its job only if it gets in and stays. SuperWetter is a polymer-based binding and wetting agent: added to the water that the cannons or sprays already put on the heap, it carries the water into a dense heap and holds the moisture in. It is applied through water truck cannons or spray systems, so the site keeps its own equipment and routine.
Crusting a standing surface
On ground that is left standing, a crust does the work that water would otherwise have to repeat. DustSkin is a polymer-based binder sprayed on by water cart or sprayer. It binds the loose surface into a crust that holds the dust down and reduces erosion, on slopes and flat tops. It is made for ground that is not driven on.
Coal and spontaneous combustion
Coal and other carbon-rich materials bring a second concern. On coal, SuperWetter lowers the risk of spontaneous combustion, and on coal and carbon-rich materials DustSkin’s crust lowers it too. Neither prevents it: each is one part of how a heap is managed.
Planning the work
- Map the sources. List each heap, dam, dump and bare area, whether it is worked or standing, and how it can be reached by water cart, cannon or sprayer.
- Match the approach. Wet the worked heaps; crust the standing surfaces; treat the driven ground as a road.
- Watch the edges. Where a standing surface is later worked or driven on, plan how that area will be treated from then on.
- Measure. Record how often each source is wetted today, and compare after treatment over the same weeks, with the weather noted.
For the product details, see Stockpile and tailings dust control.
Contact
Tell us what you need.
Tell us the product, the quantities, the mine or site and its country, and the date you need it. Holding an RFQ or tender? Send it whole, and we reply to every line we supply.
E-mail info@88chemco.com · WhatsApp +27 84 556 8888 (opens WhatsApp)
Prices and deliveries outside South Africa are quoted with each order.