Tyres

TRP (Tyre and Rim Protection)

88Chemco’s TRP is a liquid that stays inside the tyre. It is put into the tyres of mine haul trucks and other mining and heavy vehicles, on new fitments and on tyres already in service, and keeps a protective layer over the inner liner, down to the rim. One dose, by tyre size, lasts the life of the tyre.

What it does

A protective layer inside the tyre, down to the rim

TRP is a finished, ready-to-use liquid for the tyres of mining and heavy vehicles. Applied directly into the tyre chamber, it coats the rim and the inner liner of the tyre with a protective layer. TRP is not a puncture sealant.

  • Rim protection Protects the rim against corrosion, from the inside. Rust on a rim slows tyre changes.
  • Tyre-to-rim seal Helps keep the seal between tyre and rim. A weak seal raises the risk of air leaks.
  • Liner protection Protects the liner against corrosion, from the inside. Rust can degrade a tyre from inside.
  • Cooler running Helps the tyre run cooler and helps prevent heat separations. Heat shortens tyre life.
Cross-section of a tyre on its rim: TRP keeps a protective layer over the inner liner, down to the rim.
Diagram, not to scale. Yellow: the TRP layer. Light grey: the tyre’s inner liner. Mid grey: the rim and its seal.

How it goes in

At fitment, or into tyres already in service

  1. At fitment. The dose is poured into the tyre chamber from a clean 10 to 20 L bucket before the tyre is seated.
  2. Tyres in service. With the machine made safe and the tyre deflated first, the dose is pumped from the flowbin, through a meter, into the valve stem.
  3. The dose. We advise the dose for each tyre size. Send your fleet’s tyre sizes and we tell you the dose for each and how many flowbins you need.

Before you treat tyres

  • A trained tyre fitter does the work, to the mine’s own tyre procedure.
  • Some sensors inside the tyre are made for tyres that hold a liquid and some are not. Confirm with the sensor provider before treating tyres fitted with sensors.
  • The mine confirms its tyre supplier’s position on added liquids, including any warranty terms, before treating tyres.
  • Do not put TRP into a tyre that already holds another liquid product.

Supply

How TRP is supplied

To quote, send us

  • Your tyre sizes, and how many of each for every machine type.
  • New fitments, tyres already in service, or both.
  • The mine or site to deliver to, its country, and the date you need it.

Buying in South Africa

Also written as: tire and rim protection, TRP tire treatment, tire liner protection, rim corrosion protection, OTR tyre protection, haul truck tyre protection.

Further reading

Read more

Questions

Questions about TRP

What does TRP do inside a tyre?

It keeps a protective layer over the inner liner, down to the rim. It protects the rim and the liner against corrosion from the inside, helps keep the seal between tyre and rim, and helps the tyre run cooler.

How much TRP goes into each tyre?

The dose depends on the tyre size, and we advise it for each size. One dose, by tyre size, lasts the life of the tyre.

Can TRP go into tyres fitted with sensors?

Some sensors inside the tyre are made for tyres that hold a liquid and some are not. Confirm with the sensor provider before treating tyres fitted with sensors.

How is TRP supplied?

In 1 000 L flowbins. Its technical data sheet and safety data sheet are supplied on request, and deliveries outside South Africa are quoted with each order.

Contact

Tell us what you need.

Tell us the product, the quantities, the mine or site and its country, and the date you need it. Holding an RFQ or tender? Send it whole, and we reply to every line we supply.

Prices and deliveries outside South Africa are quoted with each order.

Request a quote WhatsApp